
Liquid Tight Flexible Conduit IP67 and Adaptors

Liquid Tight Flexible Conduit IP67 and Adaptors provide flexible and reliable protection for electrical wiring in wet, dusty and demanding environments. Designed for secure connections while allowing movement and vibration, the system is suitable for machinery, motors, control panels, HVAC equipment, outdoor installations and industrial applications where enhanced protection against water and dust is required.
Standards & Construction
IP67 Protection
Designed to provide protection against dust and water
when correctly assembled with compatible adaptors.
Material
Pre-galvanized hot-dipped galvanised steel tape.
Highly Flexible & Tensile Resistant
Flexible construction with tensile resistance for
demanding electrical installations.
Water Resistance
Designed for electrical installations requiring
enhanced protection against water and moisture.
Square-Locked Structure
Manufactured by helically coiling formed steel strip
to provide a strong and flexible conduit structure.
Technical Specifications
| Item No. | Inner Diameter |
|---|---|
| KSPS20-IP67 | 3/4" (20 mm) |
| KSPS25-IP67 | 1" (25 mm) |
| KSPS32-IP67 | 1 1/4" (32 mm) |
IP67 Adaptors
All adaptors are manufactured from
nickel-plated brass and are designed for secure
connection with the IP67 flexible conduit system.
WP Type Adaptor
Assembly Instructions
- Pass the locking ring, with the insulation rubber ring inside, over one end of the IP67 flexible conduit.
- Insert the inner screw into the end of the IP67 flexible conduit.
- Fit the adaptor body onto the conduit secured with the inner screw.
- Tighten the locking ring and adaptor body securely using two spanners.
WRHD Type Adaptor
Assembly Instructions
- Pass the locking ring, with the larger insulation rubber ring inside, over one end of the IP67 flexible conduit.
- Insert the inner screw into the end of the IP67 flexible conduit.
- Fit the adaptor body, with the smaller insulation rubber ring inside, onto the conduit secured with the inner screw.
- Tighten the locking ring and adaptor body securely using two spanners.
Adaptor Options
- Locknut for male adaptor
- Male Bush (Short) for WP Type Adaptor
- Male Bush (Long or Short) for WRHD Type Adaptor
Adaptor Material: Brass with nickel-plated finish.
Manufactured to:
BS EN 60529-1992 | IEC 60529-2013

